At Dealer Price
-
Xtra Power Cutting Wheels
Price on Request
-
ToolsPro Star Screw Knob Handles Male Thread Clamping Knobs M6 M8 M10 M12
Price range: ₹26.00 through ₹40.00 (GST 18% Extra)
-
ToolsPro 18mm Cutter Knife Plastic Grip Hand Held Paper Cutter
Original price was: ₹299.00.₹45.00Current price is: ₹45.00. (GST 18% Extra)
-
ToolsPro Knife Wire Brush Cleaning Brush for Rust Paint Removal
Original price was: ₹510.00.₹72.00Current price is: ₹72.00. (GST 18% Extra)
-
ToolsPro T Handle Socket Spanner Set 6mm to 14mm for Garage Home Repair
Original price was: ₹299.00.₹75.00Current price is: ₹75.00. (GST 18% Extra)
-
Handle Wire Brush Set 3 Pieces Cleaning Brush Kit
Original price was: ₹399.00.₹90.00Current price is: ₹90.00. (GST 18% Extra)
More Deals
-
ToolsPro T Handle Half Inch Socket Wrench Driver Tool
Price on Request
-
Bench Vice Cast Iron Fixed Base 100 mm Jaw Width 4 No
Original price was: ₹2,899.00.₹1,600.00Current price is: ₹1,600.00. (GST 18% Extra)
-
Xtra Power Chop Saw 14 inch XPT 472 CUT OFF MACHINE
Price on Request
-
Cable Cutter 18 Inch Wire and Cable Cutting Tool
Original price was: ₹1,599.00.₹950.00Current price is: ₹950.00. (GST 18% Extra)
-
INGCO 355mm 2350 Watt COS35538 Cut Off Saw, Max Cutting Capacity Steel Bar 30mm, Yellow, Large
Price on Request
-
Impact Driver Half Inch Heavy Duty with 6 Bits
Price on Request
-
Ingco 1/2" Cordless Impact Wrench Kit, 400 N.m, 2 x 2.0 Ah Batteries, 10-Piece Socket Set, LED Work Light, 10-Piece Screwdriver bit
Price on Request
-
Reflective Safety Jackets High Visibility Orange Waistcoat for Traffic, Running, Cycling Sports with 2 Inch Reflective Tape (pack Of 20)
Original price was: ₹2,000.00.₹800.00Current price is: ₹800.00. (GST 18% Extra)
-
Hydraulic Bearing Puller 10 Ton Industrial Gear Puller
Original price was: ₹12,999.00.₹5,400.00Current price is: ₹5,400.00. (GST 18% Extra)
-
ToolsPro Wire Brush Set 7 Inch and 9 Inch 4 Pc
Original price was: ₹599.00.₹150.00Current price is: ₹150.00. (GST 18% Extra)
-
Xtra Power Rotary Hammer Drill 20 mm Capacity XPT433
Price on Request
-
ToolsPro Hand Hydraulic Pallet Truck Lifter 2.5 Ton 1150x550mm
Original price was: ₹25,000.00.₹12,500.00Current price is: ₹12,500.00. (GST 18% Extra)
-
ToolsPro 20 Pcs Pack, M10 x 50mm Hex Head bolt With Nut & Washer, Zinc-Coated 10mm thickness and 50mm length
Original price was: ₹2,023.00.₹999.00Current price is: ₹999.00. (GST 18% Extra)
-
Armature Bearing Puller Carbon Steel 6 Inch
Original price was: ₹1,299.00.₹340.00Current price is: ₹340.00. (GST 18% Extra)
-
Bar Rod Cutting Blade Set (58 x 88 x 25 mm) for C 52 Machine
Original price was: ₹3,999.00.₹2,350.00Current price is: ₹2,350.00. (GST 18% Extra)
Heavy Duty
-
Motorized Sheet Rolling Machine for Insulation works size 5 foot
Original price was: ₹159,999.00.₹135,000.00Current price is: ₹135,000.00. (GST 18% Extra)
-
Sheet Rolling Machine for Insulation works size 5 foot
Original price was: ₹35,000.00.₹29,999.00Current price is: ₹29,999.00. (GST 18% Extra)
-
Hydraulic Pipe Bending Machine for 1/2" 3/4" 1" 1 1/4" 2" size pipes, with dies bending upto 34mm with 10 Ton Capacity
Original price was: ₹25,999.00.₹19,000.00Current price is: ₹19,000.00. (GST 18% Extra)
-
3 in 1 Bending, Shearing and Rolling Machine Size 8 inch
Original price was: ₹25,999.00.₹16,000.00Current price is: ₹16,000.00. (GST 18% Extra)
-
BOSCH GCO 220 Professional Electric Chop Saw | Powerful Cut Off Saw Machine | C-Handle | Rated Power of 2200 W| Speed upto 3800 RPM |Long Lifespan |Disc Diameter 355 mm (14 Inch)
Price on Request
-
XPT-517 DEMOLITION HAMMER XTRA POWER 1700W
Price on Request
ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (10mm, 12pcs)
Original price was: ₹1,599.00.₹499.00Current price is: ₹499.00. (GST 18% Extra)
No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
Related products
-
XPT-517 DEMOLITION HAMMER XTRA POWER 1700W
Price on RequestAdd to cartDEMOLITION HAMMER
About this item
Powerful demolition tool
High impact force
Ergonomic design
Durable construction
Ideal for breaking concrete, tiles, and more
Package Contents
1N Demolition Hammer
2N Chisel
1N User Manual
1Spanner
1Pair Carbon Brush
1N Pot Of Lubricant
2N Male Key -
XPT-421 DRILL MACHINE 10MM XTRA POWER 650W
Price on RequestAdd to cartXPT-421 DRILL MACHINE 10MM XTRA POWER 650W
About this item
Holds 10mm drill
Powerful 650-watts motor
Realistic template for daily work
More effective for screw driving action
The solid and compact body makes it easy to use
High-quality dependable machine body improves survival and improves tool life
Package Contents
1 unit Drill Machine
1 unit side Handle
1 unit Key Chuck
1 unit Scale Plate
1 Pair Carbon Brush
1 unit User Manual -
XPT-425 DRILL MACHINE 10MM XTRA POWER 400W
Price on RequestAdd to cartXPT-425 DRILL MACHINE 10MM XTRA POWER 400W
About this item
Connects with a 10 mm drill
High performance 400 watts of motor
Structured for ease during extended work
Metal gear built for extra stability of the tool
The versatile body can be used for long with no exhaustion
Package Contents
1 unit Drill Machine
1 unit Key Chuck
1 Pair Carbon Brush
1 unit User Manual -
