XPT-412 MARBLE CUTTER 110MM XTRA POWER 1100W

Related products

• Sale!

  ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (8mm, 12pcs)

  ₹1,299.00 Original price was: ₹1,299.00.₹369.00Current price is: ₹369.00. (GST 18% Extra)

  No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.

  Add to cart
  Request Price
• Sale!

  ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (12mm, 12pcs)

  ₹1,199.00 Original price was: ₹1,199.00.₹599.00Current price is: ₹599.00. (GST 18% Extra)

  No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.

  Add to cart
  Request Price
• Sale!

  XPT-407 ANGLE GRINDER 125MM XTRA POWER 1200W

  Price on Request

  XPT-407 ANGLE GRINDER 125MM XTRA POWER 1200W
  About this item
  Supports 100mm disc
  Solid 850 watts motor
  Adjustable compact body
  Cast metal gears for increased tool life
  Back side switch with on/off capabilities
  High-quality gear enables consistent use
  Side handle with two positions for better control
  Package Contents
  1 unit Angle Grinder
  1 unit Wheel Guard
  1 unit Side Handle
  1 Pair Carbon Brush
  1 unit Wrench
  1 unit User Manual

  Add to cart
  Request Price
• Sale!

  Xtra Power Professional Angle Grinder XPT 405 (Medium, Red)

  Price on Request

  XTRA-POWER XPT 405 Angle Grinder 100mm With years of professional experience and deep expertise in this area We are committed to providing a quality-assured collection of Brands. XTRA-POWER XPT 405 supports a wheel with a diameter of 100 mm. The angle grinder has two sides to choose from for the handle and comes with a spindle lock for the disc. It offers you a maximum speed of 11000 RPM for seamless performance. A strong motor with an efficiency of 850 watts makes cutting, grinding, and polishing function smoothly. The grinder is applicable for various activities and materials as it can be used with cutting discs, abrasive grinding discs, grinding stones, sanding discs, wire brush wheels, core bits, cup wheel, and polishing pads. It is built to provide a comfortable and firm grip on the ideal body.

  Add to cart
  Request Price