Shop
Showing 201–225 of 225 resultsSorted by latest
-
ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (12mm, 12pcs)
Original price was: ₹1,199.00.₹599.00Current price is: ₹599.00. (GST 18% Extra)Add to cartNo expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
-
ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (10mm, 12pcs)
Original price was: ₹1,599.00.₹499.00Current price is: ₹499.00. (GST 18% Extra)Add to cartNo expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
-
ToolsPro 20 Pcs Pack, M5 x 50mm Hex Head bolt With Nut & Washer, Zinc-Coated 8mm thickness and 50mm length
Original price was: ₹1,445.00.₹850.00Current price is: ₹850.00. (GST 18% Extra)Add to cartToolskart Hex bolts, also called hexagon screw head bolts, hex cap bolts, hex-cap screws, or machine bolts, are a very common choice when it comes to construction and repair. Hexagon screw head bolts come in a large variety of sizes and diameters. The best way to choose the right hex bolt is to find the bolt material that best suits your need ,Hex Nut are internally threaded and have a hex drive for nearly all general applications. It is most commonly used nut for wide range applications. Hex Nuts are used in any application with a mating male threaded machine bolt or screw. Can be used with any fastener with a machine screw thread. Hex Nuts are used with compatible sized bolts and washers,Flat washers are ideal for increasing the load bearing surface under a fastener’s head by distributing the load through the washer. These washers help to prevent bolts or nuts from pulling through a surface,Split lock washers are made of hardened steel with a bent surface so that the deformation of the washers under stress will prevent bolt loosening
-
ToolsPro 20 Pcs Pack, M8 x 25mm Hex Head bolt With Nut & Washer, Zinc-Coated 8mm thickness and 25mm length
Original price was: ₹1,272.00.₹720.00Current price is: ₹720.00. (GST 18% Extra)Add to cartToolskart Hex bolts, also called hexagon screw head bolts, hex cap bolts, hex-cap screws, or machine bolts, are a very common choice when it comes to construction and repair. Hexagon screw head bolts come in a large variety of sizes and diameters. The best way to choose the right hex bolt is to find the bolt material that best suits your need ,Hex Nut are internally threaded and have a hex drive for nearly all general applications. It is most commonly used nut for wide range applications. Hex Nuts are used in any application with a mating male threaded machine bolt or screw. Can be used with any fastener with a machine screw thread. Hex Nuts are used with compatible sized bolts and washers,Flat washers are ideal for increasing the load bearing surface under a fastener’s head by distributing the load through the washer. These washers help to prevent bolts or nuts from pulling through a surface,Split lock washers are made of hardened steel with a bent surface so that the deformation of the washers under stress will prevent bolt loosening
-
ToolsPro 20 Pcs Pack, M5 x 50mm Hex Head bolt With Nut & Washer, Zinc-Coated 5mm thickness and 50mm length
Original price was: ₹1,040.00.₹499.00Current price is: ₹499.00. (GST 18% Extra)Add to cartToolskart Hex bolts, also called hexagon screw head bolts, hex cap bolts, hex-cap screws, or machine bolts, are a very common choice when it comes to construction and repair. Hexagon screw head bolts come in a large variety of sizes and diameters. The best way to choose the right hex bolt is to find the bolt material that best suits your need ,Hex Nut are internally threaded and have a hex drive for nearly all general applications. It is most commonly used nut for wide range applications. Hex Nuts are used in any application with a mating male threaded machine bolt or screw. Can be used with any fastener with a machine screw thread. Hex Nuts are used with compatible sized bolts and washers,Flat washers are ideal for increasing the load bearing surface under a fastener’s head by distributing the load through the washer. These washers help to prevent bolts or nuts from pulling through a surface,Split lock washers are made of hardened steel with a bent surface so that the deformation of the washers under stress will prevent bolt loosening
-
ToolsPro 20 Pcs Pack, M10 x 50mm Hex Head bolt With Nut & Washer, Zinc-Coated 10mm thickness and 50mm length
Original price was: ₹2,023.00.₹999.00Current price is: ₹999.00. (GST 18% Extra)Add to cartToolskart Hex bolts, also called hexagon screw head bolts, hex cap bolts, hex-cap screws, or machine bolts, are a very common choice when it comes to construction and repair. Hexagon screw head bolts come in a large variety of sizes and diameters. The best way to choose the right hex bolt is to find the bolt material that best suits your need ,Hex Nut are internally threaded and have a hex drive for nearly all general applications. It is most commonly used nut for wide range applications. Hex Nuts are used in any application with a mating male threaded machine bolt or screw. Can be used with any fastener with a machine screw thread. Hex Nuts are used with compatible sized bolts and washers,Flat washers are ideal for increasing the load bearing surface under a fastener’s head by distributing the load through the washer. These washers help to prevent bolts or nuts from pulling through a surface,Split lock washers are made of hardened steel with a bent surface so that the deformation of the washers under stress will prevent bolt loosening
-
ToolsPro 20 Pcs Pack, M10 x 25mm Hex Head bolt With Nut & Washer, Zinc-Coated 10mm thickness and 25mm length
Original price was: ₹1,734.00.₹1,088.00Current price is: ₹1,088.00. (GST 18% Extra)Add to cartToolskart Hex bolts, also called hexagon screw head bolts, hex cap bolts, hex-cap screws, or machine bolts, are a very common choice when it comes to construction and repair. Hexagon screw head bolts come in a large variety of sizes and diameters. The best way to choose the right hex bolt is to find the bolt material that best suits your need ,Hex Nut are internally threaded and have a hex drive for nearly all general applications. It is most commonly used nut for wide range applications. Hex Nuts are used in any application with a mating male threaded machine bolt or screw. Can be used with any fastener with a machine screw thread. Hex Nuts are used with compatible sized bolts and washers,Flat washers are ideal for increasing the load bearing surface under a fastener’s head by distributing the load through the washer. These washers help to prevent bolts or nuts from pulling through a surface,Split lock washers are made of hardened steel with a bent surface so that the deformation of the washers under stress will prevent bolt loosening
-
ToolsPro Hand Scrap Lifting Magnet Size 9 inch, Lifting Cap 12 kg
Original price was: ₹899.00.₹425.00Current price is: ₹425.00. (GST 18% Extra)Add to cartHand Magnet, Scrap Lifting Magnet 9 x 6 Inch Lifting Capacity – 12 kg Size – 9 x 6 inch Best used a scrap lifting magnet. Sturdy handle makes it more easy to operated. Equipped with flat scrap container. Works against metals.
-
ToolsPro Hand Tool Flexible Extending Rod Stick Rope Magnetic Claws Pick Up Magnet Spring Grip Grabber Portable Auto Repair Tools
Original price was: ₹799.00.₹165.00Current price is: ₹165.00. (GST 18% Extra)Add to cartToolskart Fully flexible long reach cable with four prong claw action pick-up end spring loaded plastic finger grip magnetic tips hanging card specifications: type: magnetic claw pick up tool color: red+black total length: 55cm package included: 1 x magnetic claw pick up tool
-
Manual Bar Bending Tool TMT Rebar Tool Construction Equipment Rod Bending Machine
Original price was: ₹3,999.00.₹1,250.00Current price is: ₹1,250.00. (GST 18% Extra)Add to cartBreeze Shears Heavy Duty Manual Bar Bending Tool TMT Rebar Tool Construction Equipment Rod Bending Machine. Equipped with bearings, strong sturdy metal plate, long handle for better leverage and 4 pc nuts and colts.
-
Cheston 200A Portable Inverter Auto ARC/MMA Stick Compact Welding Machine | IGBT Technology & Digital Display | Hot Start & Anti-Stick Function | With Accessories & Face Sheild
Original price was: ₹9,999.00.₹5,599.00Current price is: ₹5,599.00. (GST 18% Extra)Add to cartInverter ARC Welding Machine (IGBT) 200A Lightweight yet advanced inverter arc welding machine for use in an assorted range of welding applications ranging from construction, mechanical, and engineering use. It relies on IGBT module technology for energy-saving and stable heat dissipation along with varying voltage input design for long-lasting use & meets your different needs with Cable Set, Welding Goggles, and All Accessories Copper Wire Low-resistance copper wire to minimize heat loss and ensure high conductivity throughout application needs. Current Regulator Adjust the currency as per your individual operation welding task so you have durable welding every time. Digital Display Get the precise readings quickly on screen so you won’t have to worry about over or under temperature.
-
ToolsPro SWG Round/Circular Wire Gauge Double Marking
Original price was: ₹599.00.₹120.00Current price is: ₹120.00. (GST 18% Extra)Add to cartBreeze Shears Wire Gauge with SWG markings and stainless steel body SWG markings 1- 36 double side measurin#g
#toolskart
-
Xtra Power Professional Angle Grinder XPT 405 (Medium, Red)
Price on RequestAdd to cartXTRA-POWER XPT 405 Angle Grinder 100mm With years of professional experience and deep expertise in this area We are committed to providing a quality-assured collection of Brands. XTRA-POWER XPT 405 supports a wheel with a diameter of 100 mm. The angle grinder has two sides to choose from for the handle and comes with a spindle lock for the disc. It offers you a maximum speed of 11000 RPM for seamless performance. A strong motor with an efficiency of 850 watts makes cutting, grinding, and polishing function smoothly. The grinder is applicable for various activities and materials as it can be used with cutting discs, abrasive grinding discs, grinding stones, sanding discs, wire brush wheels, core bits, cup wheel, and polishing pads. It is built to provide a comfortable and firm grip on the ideal body.
-
ToolsPro™ S Hook Safety Chain Plastic Barrier Safety Cone Heavy Chain Red & White 10 Meters
Original price was: ₹799.00.₹499.00Current price is: ₹499.00. (GST 18% Extra)Add to cartToolskart plastic S hook chain is ideal for channeling crowds and cordoning off or controlling access to areas that are hazardous or being cleaned. They can be used alongside posts and cones to create a multi-functional barrier system, and are suitable for a variety of workplaces including warehouses, offices, factories and many more. 1 plastic chain packet has 10 meter long chain.
-
ToolsPro Hand Button Press, Mini Button Press for Buttons Rivets, Eyelets, Pearls etc Cast Iron Fabric Button Making/Pressing Machine
Original price was: ₹1,399.00.₹725.00Current price is: ₹725.00. (GST 18% Extra)Add to cartBreeze Shears Button Press Button making / covering Setting tools for eyelets Setting tools for rivets Setting tools for press fasteners Punch tools
-
ToolsPro Bar Bending Key Set, Rod Straightener. Hand Operated Bar Bending Tools, Pack of 3, 16mm,12mm and 10mm,
Original price was: ₹1,199.00.₹480.00Current price is: ₹480.00. (GST 18% Extra) -
Magnetic Clamp Right Angle for holding welding equipment
Original price was: ₹699.00.₹125.00Current price is: ₹125.00. (GST 18% Extra)Add to cart“Breeze Shears Compact angled arrow design to maintain sheets and tubes at angles of 45, 90 and 135 degrees. Double-sided brackets for welding and assembly work. Fit for: brackets and positioners in welding, welding, marking, pipe installation. The welding magnet is designed as an extra hand that can hold black objects quickly and accurately. Best suited for welding angled joints”
-
Bearing Puller with Stopper, Metallic Fan Puller, SB Puller, Reversible Jaws, Size – 5 inch, with Handle
Original price was: ₹350.00.₹110.00Current price is: ₹110.00. (GST 18% Extra)Add to cartBreeze Shears 2 jaw fan bearing puller. Size 5 inch. Reversible Jaws. Jaws can be extended to 180 degrees
-
ToolsPro Coil Winding Machine Die Set. Plastic Farma for Motor Copper Coil Winding Machine 0.5 HP
Original price was: ₹300.00.₹225.00Current price is: ₹225.00. (GST 18% Extra)Add to cartPlastic die/farma for coil winding machine, copper winding machine accessory. Size : 0.5HP
-
Bar Cutting Blade Set (58 x 88 x 25 mm) for C 52 Machine
Original price was: ₹3,000.00.₹2,500.00Current price is: ₹2,500.00. (GST 18% Extra)Add to cartBreeze Shears bar cutting blade set – Made of High Carbon High Chromium Steel (HCHCR) – Sharp edges – Four sides usable – Durable
-
ToolsPro Pipe Wrench, Stilson Type Pipe Wrenches, Pipe Wrench for Plumbing (18 Inch)
Original price was: ₹789.00.₹545.00Current price is: ₹545.00. (GST 18% Extra)Add to cartIn The Box : toolskart Pipe Wrench (Choose Size From Variation).Solid cast iron body and jaw forged withy chrome molybdenum steel.Long lasting and durable.Package Contents: 1-Piece Stilson Type Pipe Wrench.
-
ToolsPro Hydraulic 16 Ton Wire Crimper Crimping Tool Plier kit with 11 Dies, Range 16 mm2 to 300 mm2
Original price was: ₹5,999.00.₹2,500.00Current price is: ₹2,500.00. (GST 18% Extra)Add to cartThis16-ton hydraulic crimper comes with 11 pairs of dies. Specification: Max pressure: 16 Ton Stroke capacity: 22mm 11x dies: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm2 Crimper dimension: 18 1/2″L x 5 1/2″W Case dimension: 13 3/4″L x 6 1/4″D x 3 1/4″H Total weight: 13 lbs Package Content: 1x 16-ton crimper 11x dies 1x plastic case
-
ToolsPro™ Reflective Safety Jacket, High Visibility Reflective Safety Zipper Polyester Fabric, 2 Inch Reflector Strips, Free Size, Green, Mesh Type
Original price was: ₹2,000.00.₹400.00Current price is: ₹400.00. (GST 18% Extra)Add to cartThis safety dress reduce the risk of accidents by increasing the distance at which drivers will see you, stay safe in Construction, Baggage Handling, Security, Traffic Control, Survey, Landscaping, Railroad, Sanitation, and Volunteers Made From Polyester Mesh Fabric of Reflective Smooth Fashion of Fabric for visibility of reflective tape.
-
High Speed Sheet Cutter, Shearing Machine 8 inch
Original price was: ₹6,799.00.₹2,450.00Current price is: ₹2,450.00. (GST 18% Extra)Add to cartBreeze Shears Hand Lever Shearing Machine ~Geared Action ~ Carbon Steel Body ~ Blades made of High Carbon High Chromium Steel (HCHCR) ~ Requires no electricity ~ Can be mounted on a table top or bench ~ Faster Cutting Capacity
-
6 Inch Bench Shear, Hand Shearing Machine
Original price was: ₹6,999.00.₹2,550.00Current price is: ₹2,550.00. (GST 18% Extra)Add to cartBreeze Shears Hand Lever Shearing Machine ~ Spring action makes it easier to operate ~ Carbon Steel Body ~ Blades made of High Carbon High Chromium Steel (HCHCR) ~ Requires no electricity ~ Can be mounted on a table top or bench ~ Faster Cutting Capacity
toolskart.in
