At Dealer Price
-
Latex Coated Cut Resistant Industrial Safety Hand Gloves – Orange
Price on Request
-
ToolsPro™ Spring Post Lane Divider Flexible 750mm
Price on Request
-
Rubber Hand Gloves Industrial - Black
Price on Request
-
ToolsPro™ Reflective Fluorescent Safety Jacket 50 GSM
Price on Request
-
Glow in the Dark Safety Sign - Emergency Exit
Price on Request
-
Latex Coated Cut Resistant Industrial Safety Hand Gloves – Green
Price on Request
More Deals
-
ToolsPro Knife Wire Brush Cleaning Brush for Rust Paint Removal
Original price was: ₹510.00.₹72.00Current price is: ₹72.00. (GST 18% Extra)
-
ToolsPro Chain Puller Heavy Duty Mechanical Pulling Tool
Original price was: ₹999.00.₹325.00Current price is: ₹325.00. (GST 18% Extra)
-
Manual Pipe Bending Machine for 1/2" 3/4" 1" 1 1/4" pipes, with dies.
Original price was: ₹10,999.00.₹5,900.00Current price is: ₹5,900.00. (GST 18% Extra)
-
Nitrile Coated Cut Resistant Industrial Safety Hand Gloves - Grey
Price on Request
-
ToolsPro Star Screw Knob Handles Male Thread Clamping Knobs M6 M8 M10 M12
Price range: ₹26.00 through ₹40.00 (GST 18% Extra)
-
Shearing Machine Bench Shear 5 Inch for cutting MS and SS sheets and wire, Export Qualtiy
Original price was: ₹5,999.00.₹3,100.00Current price is: ₹3,100.00. (GST 18% Extra)
-
BOSCH GSB 600 Corded Electric Impact Drill, 100Pcs Accessory Set | 600 W Motor | Speed of 3000 RPM | Rated Torque of 1.4 Nm | Impact rate of 48000 BPM
Price on Request
-
Rod Cutter Shearing Machine for 3/4" MS rods
Original price was: ₹10,989.00.₹6,200.00Current price is: ₹6,200.00. (GST 18% Extra)
-
Locking Plier 10 Inch Curved Jaw Heavy Duty Vise Grip
Original price was: ₹899.00.₹250.00Current price is: ₹250.00. (GST 18% Extra)
-
ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (10mm, 12pcs)
Original price was: ₹1,599.00.₹499.00Current price is: ₹499.00. (GST 18% Extra)
-
Hand Riveter 12.5 Inch Heavy Duty Rivet Gun Tool
Original price was: ₹1,599.00.₹780.00Current price is: ₹780.00. (GST 18% Extra)
-
XPT-421 DRILL MACHINE 10MM XTRA POWER 650W
Price on Request
-
ToolsPro™ D Shape Reflective Corner Pillar Guard 900mm
Price on Request
-
Hydraulic Bearing Puller 10 Ton Industrial Gear Puller
Original price was: ₹12,999.00.₹5,400.00Current price is: ₹5,400.00. (GST 18% Extra)
-
Hydraulic Bearing Puller 5 Ton Industrial Gear Puller
Original price was: ₹9,999.00.₹4,200.00Current price is: ₹4,200.00. (GST 18% Extra)
Heavy Duty
-
Motorized Sheet Rolling Machine for Insulation works size 5 foot
Original price was: ₹159,999.00.₹135,000.00Current price is: ₹135,000.00. (GST 18% Extra)
-
ToolsPro™ Plate Earth Compactor with Honda GX160 Engine with Clutch System
Original price was: ₹52,000.00.₹35,500.00Current price is: ₹35,500.00. (GST 18% Extra)
-
ToolsPro™ Power Trowel with by Honda GX160
Original price was: ₹55,000.00.₹33,500.00Current price is: ₹33,500.00. (GST 18% Extra)
-
ToolsPro™ Tamping Rammer with Honda GX160 Engine
Original price was: ₹51,000.00.₹32,000.00Current price is: ₹32,000.00. (GST 18% Extra)
-
Sheet Rolling Machine for Insulation works size 5 foot
Original price was: ₹35,000.00.₹29,999.00Current price is: ₹29,999.00. (GST 18% Extra)
ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (12mm, 12pcs)
Original price was: ₹1,199.00.₹599.00Current price is: ₹599.00. (GST 18% Extra)
No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
Related products
-
XPT-436 DEMOLITION HAMMER 17MM XTRA POWER 1080W
Price on RequestAdd to cartXPT-436 DEMOLITION HAMMER 17MM XTRA POWER 1080W
About this item
Easy handheld style
Configured with a chisel bit
Holds a hex chisel of 17mm
The motor capacity of 1080-watts
Enduring use of such a comfortable body
Hard metal gearing for performance gains and increased product life
Package Contents
1 unit Demolition Hammer
2 units Grease
2 units Chisel (1 Pointed & 1 Flat)
1 unit Wrench
1 Pair Carbon Brush
1 unit Carrying Case
1 unit User Manual -
ToolsPro Coil Winding Machine Die Set. Plastic Farma for Motor Copper Coil Winding Machine 0.5 HP
Original price was: ₹300.00.₹225.00Current price is: ₹225.00. (GST 18% Extra)Add to cartPlastic die/farma for coil winding machine, copper winding machine accessory. Size : 0.5HP
-
ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (8mm, 12pcs)
Original price was: ₹1,299.00.₹369.00Current price is: ₹369.00. (GST 18% Extra)Add to cartNo expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
